A clean well-maintained car park inclusive of floors, walls, ceilings and stairs provides a safe parking environment for staff and visitors alike.

DEFELECTA® products assists with controlling ingress of water and oil penetration to the concrete substrate, increases density, surface hardness and wear/slip resistance.  With cleaning protocols and schedules in place surface dusting, cleaning and maintenance becomes more manageable.

When applied to new or aged concrete the product(s) will densify, harden the surface and prevent dusting and offer increased slip resistance.

Concerns in these facilities are:

  • Oil/liquid ingress resistance
  • Concrete surface dusting
  • Tyre squeal – surface dependant
  • Moisture ingress
  • High maintenance
  • Urine ingress

These products are what we would recommend (but not limited to) for concrete concerns.

DEFLECTA ANTIMICROBIAL® is government certified (APVMA approval no. 60195/56867) to kill bacteria/pathogens with a 99.99% kill rate for Golden Staph, E-coli, Listeria and Salmonella on and within the concrete matrix. It will stay active killing these bacteria/pathogens for a minimum of 5 years.

It produces a sanitised environment on the surface and within the concrete matrix with an internal moisture suppressant – the best solution for bacterial control and mould suppression.

DEFLECTA ANTIMICROBIAL® will prevent unwanted fluids entering new concrete and purging containments and odours that are held within the existing concrete matrix and a continuous sanitising process.

This assists in high infection control protocols

Read more

DEFLECTA ANTIBACTERIAL® is government certified (APVMA approval no. 83823/109029) to kill bacteria/pathogens with a 99.99% kill rate for Golden Staph, E-coli, Listeria and Salmonella on and within the concrete matrix. It will stay active killing these bacteria/pathogens for a minimum of 5 years.

It produces a sanitised environment on the surface and within the concrete matrix providing a bacterial control and mould suppression solution.

DEFLECTA ANTIBACTERIAL® will prevent unwanted fluids entering new concrete and purging containments and odours that are held within the existing concrete matrix and a continuous sanitising process.

DEFLECTA DEPEL® seals and preserves natural stone, brick, slate, masonry and precast concrete for internal and external surfaces.

It is a hydrophobic water repellent which provides a hard-wearing breathable barrier to the surface.

DEFLECTA STABILIZER® is a cure and seal for fresh pour concrete, in the form of a liquid that is of constant volume and enters into the voids and capillaries of the concrete matrix whilst is formulated to retain moisture and improve hydration and reduces concrete shrinkage during its cure/hydration process.

It withholds moisture by confining its mobility within the concrete matrix and because of its constant volume significantly increases compressive strengths, flexural strength and surface hardness.

DEFLECTA SURFACE BINDER® is a water borne concrete sealer designed for use on concrete to provide a clear semi-gloss surface seal. It can be used internally for commercial or light industrial applications. HACCP Australia endorses this floor surfacing as being suitable in food processing and food handling environments in facilities that operate in accordance with the HACCP based Food Safety Programme.

DEFLECTA TOPEL® is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is hydrophobic - providing increased wear and slip resistance. This product is a densifier that penetrates and bonds with the Portland cement components of the concrete and it becomes abrasive resistant and damage from water contaminants is reduced.

DEFLECTA TOPEL® will not alter the appearance of the concrete when applied. However, with time and wear, the slab will improve its appearance compared to an untreated slab and the concrete function will alter as a hydrophobic slip resistant surface is created.

DEFLECTA® TOPEL-OTM is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is oleophobic - providing increased wear and slip resistance. This product is a densifier that penetrates and bonds with the Portland cement components of the concrete and it becomes abrasive resistant and damage from water contaminants is reduced.

DEFLECTA® TOPEL-OTM will not alter the appearance of the concrete when applied. However, with time and wear, the slab will improve its appearance compared to an untreated slab and the concrete function will give an oleophobic slip resistant surface is created.