Topel-O
DEFLECTA® TOPEL-OTM is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is oleophobic - providing increased wear and slip resistance.
Used for
Industry
Can be applied to both interior or exterior concrete slabs in areas such as car parks and ramps, truck service facilities, warehousing, stairs, driveways and paving, prior to line marking.
Buyers
Architects, Builders, Contractors, Applicators, Clients, International.
Materials
Concrete/cementitious based materials.
About Topel-O
Description
DEFLECTA® TOPEL-OTM is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is oleophobic - providing increased wear and slip resistance.
Cavpower CAT
How it works
DEFLECTA® TOPEL-OTM when applied to the concrete both hardens/densifies the surface which prevents ingress giving an oleophobic slip resistant surface finish.
Slip Resistance Classification
- P3 - Burnished finish
- P5 - Steel trowel or broomed finish
Benefits
- Oil resistant
- Slip resistant surface
- Prevents surface dusting
- Increases abrasion resistance and durability
- Low VOC*
- Low VOS*
- Water based formulation
- Easy maintenance
- Easy application
- High coverage rate
- Will not alter the appearance of the concrete when applied
*VOC/VOS = Volatile Organic Compounds and Volatile Organic Solvents
DOWNLOADABLE RESOURCES
Technical Information
Related Case Studies
Cavpower CAT
DEFLECTA® TOPEL–OTM was applied to the Truck Service Area/Bays and Training areas. The Clients ...
CAT
Commercial
Contact
Get a free no
obligation quote
We understand that choosing the correct solution and type of product is essential for the success of any project. Deflecta has a technical support team with many years of concrete industry experience and successful project applications and are ready to help you find the right solution for your application.
Products
You may also like
RELATED FAQs
Frequently Asked Questions
-
What does the DEFLECTA TOPEL-OTM do?
Densifies the concrete and repels oil.
-
Why does the surface need to be clean before you apply your products?
To allow the product to penetrate or seal correctly a clean, dust free surface is required
-
What are the consequences if the surface area to be treated is not cleaned properly before the application?
Possible product performance failure.
-
Why do you broom the product around the floor area?
To allow the product to be evenly spread out and to prevent pooling.
-
Can all the DEFLECTA® products be applied to new concrete?
No. Only DEFLECTA ANTIMICROBIAL®, DEFLECTA STABILIZER® and DEFLECTA® COOPER CONTROLTM can be applied to new concrete (at the time of pour).
-
Can all the DEFLECTA® products be applied to aged concrete?
Yes. All the DEFLECTA® products can be applied to aged concrete (any time after 28 days from time of pour).
-
How long until the area is trafficable for DEFLECTA TOPEL-OTM?
After the application of DEFLECTA TOPEL-OTM light traffic after 24 hours and fully cured at 7 days.
-
Can the DEFLECTA® products be used internally and externally?
DEFLECTA SURFACE BINDER®, DEFLECTA MOISTURE SUPPRESSANT® and DEFLECTA HEALTH SEAL® are manufactured for internal surface applications, all other products can be applied to internal or external surface areas.
-
Can anyone apply the product?
Yes. Although training and certification is required to apply the products on commercial projects.
-
What should I do if the product gets onto glass etc?
Immediately remove the product with soapy water to avoid the product etching the glass.
-
What is the standard slip resistance of DEFLECTA TOPEL-O?
The product has a slip test classification of P3 – Burnished finish and P5 – Steel trowel finish.
-
Is this product Green Star compliant?
Yes. The product is compliant with Green Star Building Council of Australia.
Read more