Assisting in the prevention of hazards around walkways, maintaining quality/natural appearance and cleanliness of hygiene on concrete areas either outside or within amenities is of utmost importance.

Keeping these areas sanitised can greatly reduce the occurrence of mould growth, odours and urine ingress.

When applied, concrete DEFLECTA® products can assist in sanitising and odour prevention and slip resistance of concrete surfaces.

Concern in these facilities are:

  • Bacteria/pathogens that occur on and within the concrete matrix
  • Growth of mould, mildew and fungi
  • Moisture Ingress
  • Health risks to students, staff, visitors, players and patrons
  • Urine ingress
  • Contaminates and odours within the concrete
  • Sanitising/hygiene – cleaning programme
  • Concrete dusting and cleaning
  • Concrete wearability
  • Slip resistance

These products are what we would recommend (but not limited to) for concrete concerns.

DEFLECTA ANTIMICROBIAL® is government certified (APVMA approval no. 60195/56867) to kill bacteria/pathogens with a 99.99% kill rate for Golden Staph, E-coli, Listeria and Salmonella on and within the concrete matrix. It will stay active killing these bacteria/pathogens for a minimum of 5 years.

It produces a sanitised environment on the surface and within the concrete matrix with an internal moisture suppressant – the best solution for bacterial control and mould suppression.

DEFLECTA ANTIMICROBIAL® will prevent unwanted fluids entering new concrete and purging containments and odours that are held within the existing concrete matrix and a continuous sanitising process.

This assists in high infection control protocols.

Read more

DEFLECTA ANTIBACTERIAL® is government certified (APVMA approval no. 83823/109029) to kill bacteria/pathogens with a 99.99% kill rate for Golden Staph, E-coli, Listeria and Salmonella on and within the concrete matrix. It will stay active killing these bacteria/pathogens for a minimum of 5 years.

It produces a sanitised environment on the surface and within the concrete matrix providing a bacterial control and mould suppression solution.

DEFLECTA ANTIBACTERIAL® will prevent unwanted fluids entering new concrete and purging containments and odours that are held within the existing concrete matrix and a continuous sanitising process.

DEFLECTA DEPEL® seals and preserves natural stone, brick, slate, masonry and precast concrete for internal and external surfaces.

It is a hydrophobic water repellent which provides a hard-wearing breathable barrier to the surface.

DEFLECTA MOISTURE SUPPRESSANT® is a clear aqueous born internal moisture barrier/treatment, protecting concrete for smaller applications such as office, warehouse, commercial/domestic and retail areas.

DEFLECTA STABILIZER® is a cure and seal for fresh pour concrete, in the form of a liquid that is of constant volume and enters into the voids and capillaries of the concrete matrix whilst is formulated to retain moisture and improve hydration and reduces concrete shrinkage during its cure/hydration process.

It withholds moisture by confining its mobility within the concrete matrix and because of its constant volume significantly increases compressive strengths, flexural strength and surface hardness.

DEFLECTA SURFACE BINDER® is a water borne concrete sealer designed for use on concrete to provide a clear semi-gloss surface seal. It can be used internally for commercial or light industrial applications. HACCP Australia endorses this floor surfacing as being suitable in food processing and food handling environments in facilities that operate in accordance with the HACCP based Food Safety Programme. 

DEFLECTA HEALTH SEAL® is a clear formulation for the protection and sealing of concrete surfaces to prevent ingress of body fluids and moisture.

DEFLECTA HEALTH SEAL® is an excellent subfloor pre-treatment prior to the installation of floor finishes.

DHS will not suppress hydrostatic pressure.

DEFLECTA BOTANY® will suppress the growth of mould, mildew and fungi and reduce build-up of surface dirt and soiling developed over time to wet areas - amenity blocks including public space areas on cementitious based materials - floors, walls and ceilings.

It works at keeping the surface clean while preserving the natural appearance and supports company/consumer hygiene requirements.

DEFLECTA TOPEL® is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is hydrophobic - providing increased wear and slip resistance. This product is a densifier that penetrates and bonds with the Portland cement components of the concrete and it becomes abrasive resistant and damage from water contaminants is reduced. 

DEFLECTA TOPEL® will not alter the appearance of the concrete when applied. However, with time and wear, the slab will improve its appearance compared to an untreated slab and the concrete function will give a hydrophobic slip resistant surface is created.

DEFLECTA® TOPEL-OTM is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is oleophobic - providing increased wear and slip resistance.   This product is a densifier that penetrates and bonds with the Portland cement components of the concrete and it becomes abrasive resistant and damage from water contaminants is reduced.

DEFLECTA® TOPEL-OTM will not alter the appearance of the concrete when applied.  However, with time and wear, the slab will improve its appearance compared to an untreated slab and the concrete function will give an oleophobic slip resistant surface is created.