DEFLECTA ANTIBACTERIAL® is government certified (APVMA approval no. 83823/109029) to kill bacteria/pathogens with a 99.99% kill rate for Golden Staph, E-coli, Listeria and Salmonella on and within the concrete matrix. It will stay active killing these bacteria/pathogens for a minimum of 5 years.

It produces a sanitised environment on the surface and within the concrete matrix providing a bacterial control and mould suppression solution.

DEFLECTA ANTIBACTERIAL® will prevent unwanted fluids entering new concrete and purging containments and odours that are held within the existing concrete matrix and a continuous sanitising process.

DEFLECTA DEPEL® seals and preserves natural stone, brick, slate, masonry and precast concrete for internal and external surfaces.

It is a hydrophobic water repellent which provides a hard-wearing breathable barrier to the surface.

DEFLECTA STABILIZER® is a cure and seal for fresh pour concrete, in the form of a liquid that is of constant volume and enters into the voids and capillaries of the concrete matrix whilst is formulated to retain moisture and improve hydration and reduces concrete shrinkage during its cure/hydration process.

It withholds moisture by confining its mobility within the concrete matrix and because of its constant volume significantly increases compressive strengths, flexural strength and surface hardness.

DEFLECTA SURFACE BINDER® is a water borne concrete sealer designed for use on concrete to provide a clear semi-gloss surface seal. It can be used internally for commercial or light industrial applications. HACCP Australia endorses this floor surfacing as being suitable in food processing and food handling environments in facilities that operate in accordance with the HACCP based Food Safety Programme.           

DEFLECTA TOPEL® is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is hydrophobic - providing increased wear and slip resistance. This product is a densifier that penetrates and bonds with the Portland cement components of the concrete and it becomes abrasive resistant and damage from water contaminants is reduced. 

DEFLECTA TOPEL® will not alter the appearance of the concrete when applied. However, with time and wear, the slab will improve its appearance compared to an untreated slab and the concrete function will give a hydrophobic slip resistant surface is created.

DEFLECTA® TOPEL-O^TM is an inorganic silicon-containing material concrete treatment that increases both density and surface hardness and is oleophobic - providing increased wear and slip resistance.   This product is a densifier that penetrates and bonds with the Portland cement components of the concrete and it becomes abrasive resistant and damage from water contaminants is reduced. 

DEFLECTA® TOPEL-O^TM will not alter the appearance of the concrete when applied.  However, with time and wear, the slab will improve its appearance compared to an untreated slab and the concrete function will give an oleophobic slip resistant surface is created.

DEFLECTA MULTI SEALER® is a system designed for use where bacteria and mould is the concern as it suppresses mould, mildew and fungi when applied over